top of page

Sump Pumps

Writer's picture: Vincent PlumbingVincent Plumbing

Sump Pump Basics 

A sump pump usually stands in a sump pit -- a hole with a gravel base about 2 feet (60 centimeters) deep and 18 inches (45 centimeters) wide -- dug in the lowest part of your basement or crawlspace. As the pit fills with water, the pump turns on. It moves the liquid out of the pit through pipes that run away from your home to a spot where the water can drain away from your foundation. The pipe usually has a one-way valve called a check valve at the pump end to keep the water from flowing back into the pit.

Most sump pumps turn on automatically through a float activator arm or a pressure sensor. The pressure sensor works just like its name suggests: Water exerts more pressure on the sensor than air does, which causes the pump to activate. The float activator works a lot like the one in your toilet tank. A buoyant ball floats on top of the water, manually moving the arm as the water level rises. You can also buy a manually operated pump, which works only when you decide to turn it on, but these aren't as common because of their lack of convenience. Automatic pumps also have an option for you to activate the pump if the float arm or sensor should fail to work.


 
 
 

1 Comment


gradygalvez144
Jun 27, 2019

Nice article to read about sump pump. You must also check this link http://www.pressurecoach.com/best-sump-pump-reviews

Like
bottom of page